Resun King-2F is a fountain pump with an output of 1000 L/h that can lift a column of water 1.95 m. Power consumption is 20 W, voltage 220 V, outlet diameter 13/19 mm, dimensions 160 × 65 × 90 mm. According to the description, a reinforced rotor creates a strong flow, the stainless steel rotor shaft does not oxidise and the motor is sealed in epoxy resin. The kit includes two fountain nozzles — "volcano" and "bell" — and a flow control valve. The rotor is protected by a sponge, and the pump is held in place by 4 suction cups.
What the manufacturer claims
Resun emphasises durability: the stainless shaft and epoxy-sealed motor should ensure safety and reliability. According to the description, the pump can be used both submerged and out of water.
Key specifications
| Parameter | Value |
|---|---|
| Output | 1000 L/h |
| Max head | up to 1.95 m |
| Power | 20 W |
| Voltage | 220 V |
| Outlet | 13/19 mm |
| Dimensions | 160 × 65 × 90 mm |
| Kit | volcano and bell nozzles, flow regulator |
| Mounting | 4 suction cups |
Pros
- Two nozzles. Volcano and bell for different fountains.
- Flow regulator. Adjust the height and strength of the jet.
- Stainless shaft. Does not oxidise.
- Epoxy-sealed motor. Protected from water.
- Sponge on the rotor. Protects against debris.
- Versatile. Pond, fountain, aquarium circulation.
Cons and what to watch
- "Can run out of water" — with caveats. The pump must never run dry.
- No cable length. Important for a pond.
- No flow curve. The flow at 1 m height is not stated.
- Advertising text in the description. Leftover SEO keywords and "wholesale".
Output and height
1000 L/h is the maximum flow with no lift. The higher the jet has to go, the less water passes through the pump; at 1.95 m the flow practically stops. For a nice fountain, plan the jet height with a margin — roughly half the maximum. The flow regulator helps fine-tune the effect.
Running out of water
The description allows the pump to be used out of water, but only with a flooded inlet: water must flow to the inlet by gravity, and the housing and hose must be completely filled. Running dry quickly destroys the rotor and bearing. If you are unsure about the setup, use the pump submerged.
For a garden pond
A fountain does more than decorate a pond: it oxygenates the water, which helps fish in hot weather and during water treatments such as Tetra Pond AlgoRem. Put the pump on a stand above the bottom so it does not suck up silt. An outdoor socket needs a residual current device.
For an aquarium
In a large aquarium, the pump can create current or feed a DIY filter. For aquariums, 1000 L/h is a strong flow, so turn it down with the regulator in smaller tanks.
Maintenance
Rinse the rotor sponge regularly — a clogged sponge reduces flow and overloads the motor. Once a season, remove the rotor cover and clean off blanketweed and deposits. For winter, take the pump out of the pond, rinse it and store it in a bucket of water or a dry place, as the instructions say.
Safety
Unplug the pump before putting your hands in the water or lifting it out. Do not pull the pump by the cable. If the housing is damaged or the insulation is cracked, stop using it.
Alternatives
For small fountains and tabletop water features, the smaller Resun King-1F at 380 L/h is suitable. For biological pond filtration, Resun bio balls come in handy.
Who it suits
The pump suits small garden ponds and decorative fountains, as well as water circulation in large aquariums. Other equipment is in fish equipment and for fish.
Verdict
The Resun King-2F is a 1000 L/h fountain pump with a head of up to 1.95 m, two nozzles and a flow regulator, a stainless shaft and a sealed motor. The downsides are that the listing gives no cable length or flow curve, and the out-of-water claim requires the right setup.
FAQ
What is the output?
Up to 1000 L/h with no lift.
How high can it lift water?
Up to 1.95 m, but at the maximum the flow is almost zero.
Which nozzles are included?
Volcano and bell.
Can the flow be adjusted?
Yes, there is a control valve.
Can it be used out of water?
Only with a flooded inlet; it must never run dry.
How much power does it use?
20 W.
Is it suitable for an aquarium?
Yes, for large aquariums, with reduced flow.
